G-Tec 40400061 TTCF-9B Heated Cooler Transmission Line Flusher & Hydraulic System Flusher

Description

G-Tec 40400061 TTCF-9A Heavy Duty Base Unit – Heated Component Flusher – Transmission Cooler System and Hydraulic System Flusher

The Flo-Dynamics TTCF-9B Base Unit is a high flow hydraulic system flusher that offers powerful and reliable cleaning solutions for transmission coolers, lines, and other hydraulic systems that have been contaminated by sludge, varnish deposits, and other particles. With a high flow rate of up to 8 GPM, this system is ideal for heavy-duty transmission cooling systems.

The TTCF-9B features two preset air-injected scrubbing action flush patterns, making it easy to clean your hydraulic system without any manual intervention. You can also perform a manual flush using the same hydraulic fluid as the system being cleaned. The reusable 60 micron screen filter helps you check the system's cleanliness, ensuring optimal performance.

Equipped with a preset heater that can heat up to 140°F in just 45 minutes, the TTCF-9B offers a powerful scrubbing action that effectively removes trapped debris and solidified waxy varnish deposits. The reverser valve allows you to switch flow direction easily during and between flush cycles without removing service hoses, saving you time and effort.

In summary, the Flo-Dynamics TTCF-9B Base Unit High Flow Hydraulic System Flusher is an effective and efficient solution for cleaning hydraulic systems, offering a user-friendly design and powerful performance. If you need a reliable and efficient hydraulic system flusher for your heavy-duty transmission cooling system, the G-Tec 40400061 TTCF-9B is the perfect choice.

The G-Tec 40400060 TTCF-9A hydraulic system flusher is packed with features to make transmission cooling system maintenance easy and effective. Its powerful 3/4 HP motor requires a dedicated 20-amp or two separate 15-amp circuits to power its 13' heavy-duty 3/4" service hoses.

With a 10-gallon transmission fluid capacity and an easy-to-read level sight glass, you'll always know when it's time to refill. The adjustable flow rate of 1-8 GPM is specially developed for every type of vehicle, from automobiles to heavy-duty transmission cooling systems requiring a higher flow rate.

The TTCF-9A is equipped with a low fluid sensor that automatically shuts off the heater and pump to prevent damage to the system. A 60 micron cleanable screen filter with a convenient "T" handle simplifies verification of cleanliness, and a reverser valve allows easy flow reversal without removing service hoses.

Two auto-selected GPM-dependent flush patterns are designed to specifically inject the optimal amount of air, creating an agitating scrubbing action to remove trapped debris and solidified waxy varnish. Selectable flush times range from continuous to 15-120 minutes, with or without air injection.

When the flush cycle is complete, the TTCF-9A automatically stops and alerts you, displaying the flush cycle results. An air purge feature allows for easy fluid removal from the system and service hoses, while a spin-on filter timer displays hours used.

For added convenience, the TTCF-9A includes two non-bypass spin-on magnetic replaceable system filters (P/N 40300272). With all of these features and more, the G-Tec 40400060 TTCF-9A hydraulic system flusher is the ideal choice for maintaining your transmission cooling system.

Features

 

• Powerful 3/4 HP motor that can handle heavy-duty transmission cooling systems
• Requires a dedicated 20-amp or two separate 15-amp circuits for reliable and consistent performance
• 13' heavy-duty 3/4" service hoses that are durable and easy to use
• 10-gallon transmission fluid capacity with an easy-to-read level sight glass for convenient fluid monitoring
• 8 GPM flow rate for fast and efficient flushing
• Low fluid heater cutoff float switch for safe and reliable operation
• 60-micron cleanable screen filter for checking system cleanliness and preventing contamination
• Reverser valve for easy switching of flow direction during and between flush cycles without changing service hoses
• Two preset flush patterns or manual air purge options that agitate during flushing and clear service lines and cooling systems after flushing
• 1500 watt heater set at 140°F for quick and effective heating
• Temperature gauge for monitoring system temperature during operation
• Ability to flush with or without heat for added flexibility
• Two non-bypass spin-on magnetic replaceable system filters (P/N 40300272) for keeping the system clean and operating smoothly
• Hour run meter for tracking system usage and maintenance needs
• 10" semi-pneumatic tires for easy mobility and positioning in various locations

Available Adapter Kits-Sold Separately (NOT INCLUDED)

• P/N 40201346   Allison Adapter Kit (Includes 2 each: Connection Hoses, -8 (1/2 JIC), -12 (3/4 JIC), -16 (1” JIC), -20 (1-1/4” JIC))

• P/N 40300434  Automotive to TTCF Adapter Kit (Reduces heavy duty hose couplers to fit automotive adapters.)

Side-by-side comparison table of the features and specifications for Flo-Dynamics TTCF-9A and TTCF-9B models.

Specifications:

• Motor: 3/4 HP for powerful performance
• Power requirements: dedicated 20-amp or two separate 15-amp circuits for reliable and consistent operation
• Service hoses: 13 feet of heavy-duty 3/4 inch hoses for durability and ease of use
• Fluid capacity: 10 gallons with an easy-to-read level sight glass for convenient monitoring
• Flow rate: 8 gallons per minute (GPM) for fast and efficient flushing
• Heater: 1500 watts with low fluid heater cutoff float switch for safe and effective heating
• Filter: 60 micron cleanable screen filter and two non-bypass spin-on magnetic replaceable system filters (P/N 40300272) for keeping the system clean and running smoothly
• Reverser valve: allows easy flow reversal without changing service hoses during and between flush cycles for time-saving convenience
• Flush patterns: two preset flush patterns or manual air purge options to additionally agitate during flushing and to clear service lines and cooling system after flushing for optimal cleaning
• Temperature gauge: for monitoring system temperature during operation
• Flush with or without heat for added flexibility in operation
• Hour run meter for tracking system usage and maintenance needs
• Tires: 10 inch semi-pneumatic for easy mobility and positioning in various locations