G-Tec TTCF-8 Heated Cooler Transmission Line Flusher 40400038

VENDOR:- G-Tec

SKU# 40400038

In Stock

$5,558.09

Quantity

- +

Only -2 left!

Important Shipping Information:-
• Orders received on Fridays after 11am EST will be processed the next business day
• All orders shipped to a RESIDENTIAL ADDRESS will be subject to Additional charges from all carriers at this time.
• What is LIMITED ACCESS - Commercial / Non-Commercial / Farms Click Here to Read More

Description

G-Tec TTCF-8 Heated Cooler Transmission Line Flusher 40400038

Our Heated Cooler Line Flusher cleans out the cooler lines and heat exchanger prior to installing a rebuilt or new transmission; a process which has been proven to minimize the likelihood of repeat repairs. This special tool removes contamination in the cooling system by melting down waxy varnish residue from burnt ATF and by purging the metal particles, clutch materials, and other contaminants from the system. Only by heating the cooling system back to high temperatures will the exchanger expand releasing the debris into the flow of pulsating hot oil.

This model comes with all the features of our previous models with the addition of the one-nut Oberg 64 micron filter, so you can easily show your customers the dirt you cleaned out of their lines. The TTCF-8 also comes complete with nearly adapter we offer allowing you to clean the cooler lines of hundreds of models of vehicles!

Every automatic transmission (A.T.) cooling system, whether it is an air-to-oil cooler or the new puck-style coolers must be cleaned when the transmission is overhauled or replaced in order to minimize repeat repairs - the dreaded comeback. G-TEC’s Heated Cooler Line Flusher is the most effective and economic method for removing contamination and debris from the cooling system.

Features of the TTCF-8 Flusher

Includes all possible features for G-TEC Heated Cooler Line Flusher

A - 28 micron Oberg filter with one-nut assembly allows you to show your customer the dirt you’ve cleaned out of their cooling system
B - Tool tray for holding your adapters
C - 5gpm Flowmeter to monitor the ATF running through the unit and the cooler lines
D - 2 non-by-pass spin on filters (shown here: G-TEC’s NBP2 filters but Ford’s FL13B filters can also be used)
E - Vent Tower for use with the air injections system
F - Temperature gauge to monitor the temperature of the fluid
G - Float Switch designed to cut power to the heater if the fluid level drops too low to protect the heating element

H - Electrical Box containing the motor & heater on/off switches and the red & green indicator lights (the red light lets you know the fluid is too low)
I - 1/2 hp service factor motor
J - 1500 watt heater *may change shape/color
K - Manual flow reverse valve
L - Hour meter to determine how long you’ve been flushing (useful for determining when to change filters)
M - 1750 ppm pump
N - Air injection for added scrubbing
O - 10” semi-pneumatic tires
P - Pressure relief valve maintains proper pressure to protect the cooling system

WARNING: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Specifications:

10 gallon all-steel low profile tank powder coated for durability
Auto-controlled 1500 Watt internal tank heater keeps the fluid at the optimum temperature to clean the cooling system
1 inch gauge for monitoring the temperature of the fluid in the flusher's tank
The low fluid safety (float) switch prevents damage to the heater by cutting power to the heater when the fluid level in the tank drops too low - illuminating a red warning light on the electrical box
Sealed heavy duty on/off switches with green indicator lights
1750 ppm (pulses per minute) pulsating pump with a pressure relief valve and a commercial-grade motor with a 1/2 hp service factor
10 inch semi-pneumatic rubber tires for easy mobility
Two magnetic non-bypass spin on absorption filters
Two 8 foot hoses with quick disconnects
1 inch drain plug allows quick and easy cleaning of tank
Motor shield reduces noise and tool tray holds adapters
Two rubber grommets for the hoses to pass through thus preventing damage from vibration
Hydraulic purge valve prolongs the life of the filters and fluid
5 gpm flowmeter shows any system blockages or restrictions
Longer handle for easy mobility
Air injection system for added scrubbing and vent tower
Reverser valve
64 micron Oberg filter with one-nut assembly for easy cleaning
Hour meter to determine how long you have been flushing - useful for determining when to change filters
Comes with the following adapter sets: Domestic, Banjo, Honda, SDA, P1, P2, P3, P4, Honda/Acura Puck (P6), Audi/VW/Nissan (AVWN)

Shipping

This Item Qualifies for FREE LTL SHIPPING (via Truck) it applies only to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.

LTL Freight Shipping Options

Lift Gate Is Required.(+$150.00)
I have a forklift for unloading Freight at My Business location
I have a way of unloading Freight at my location
Deliver to local freight terminal for pickup.

Please select one of the choices above BEFORE adding to the cart!

PLEASE NOTE:
This item ships by truck. If you Require to ship to a Non-Commercial Address, please email
or call (706) 478-0072 us so we can give you an updated shipping Quote.

Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.

Video

G-Tec TTCF-8 Heated Cooler Transmission Line Flusher 40400038

Back To - G-Tec