Ken-Tool 21100 22 Ton Jack Stands (Pair)
Ken-Tool 21100 22 Ton Jack Stands (Pair)
BRAND: Ken-Tool
SKU: 21100
In Stock
Couldn't load pickup availability
Ken-Tool 21100 22 Ton Jack Stands (Pair)
Item Number: 21100
A matched pair of 22 ton jack stands built for truck, bus and heavy equipment work. Fully welded construction and chrome-plated hardware keep the load steady once the jack comes out.
Applications
- Heavy truck, tractor and trailer service
- Transit, motorcoach and school bus fleets
- Agricultural and construction equipment
- Commercial tire shops and mobile service trucks
Features & Benefits
- 22 ton (44,000 lb) rated capacity per stand
- Sold as a matched pair so both sides of an axle are supported equally
- Fully welded construction with no bolted joints to work loose
- Chrome-plated components resist rust, road salt and shop chemicals
- Wide base footprint for stability on concrete shop floors
- Part of Ken-Tool’s matched 21100-21108 jack and stand system
- Backed by a one-year Ken-Tool warranty
Safety & Compliance
Always support a raised vehicle on stands rated for the load before going underneath it. Never work under a vehicle held by a jack alone. Read all instructions before use.
Pairs with the Ken-Tool 21103 22 Ton Air Truck Jack for a matched lift-and-hold setup.
Prop 65 Warning
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Item No.: 21100
- Rated capacity: 22 ton (44,000 lb) per stand
- Quantity: Pair (2 stands)
- Shipping dimensions: 15in. x 11in. x 14in.
- Warranty: One year
Shipping
This is a Plus Shipping item which only can be shipped to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.
Price will be calculated at check-out.
UPS Shipping rates are calculated based on actual and dimensional weights. To find your rate, add the item to your cart and then enter your zip code into the right hand side of the shopping cart. If your total UPS order is over 120 lbs, the system will not calculate charges.
Shipping Responsibility Disclaimer
Once a package is marked as "Delivered" by the carrier, we are no longer responsible for its whereabouts unless you specifically requested a signature requirement at checkout. If no signature is requested and the package goes missing after delivery, we cannot be held liable for the loss. Additionally, any delivery issues must be reported to us within 12 hours of the marked delivery time. Failure to notify us within this timeframe may result in a forfeiture of claims, as delayed reporting significantly reduces the chances of locating a misdelivered package. If you would like to add insurance to your shipment to protect against potential loss or theft, please inform us before your order ships. Insurance is not included by default.
*Note: If you are having trouble checking out, please call us at (321)-423-5290.
OR
If you have a special shipping request you need arranged, please email
or call us.
Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.
SHIPPING COST DISCLAIMER
Shipping can be very complicated, especially with LTL Freight items, and it can be challenging to always quote the exact shipping price with complete accuracy. We do not make money from shipping and only pass along the actual shipping cost charged by the carrier.
If the shipping cost we quoted or provided is less than the actual amount charged by the carrier, we reserve the right to not honor the sale at that shipping price and may cancel the order if necessary. However, before any order is canceled, you will be given the opportunity to pay any additional shipping charges if you choose to do so.
Warranty Information
Ken-Tool customers should be satisfied with the performance, quality and workmanship of whatever product they buy. All Ken-Tool products are warranted against defects in materials and workmanship for one year from the date of purchase. Any Ken-Tool branded product that fails to perform its intended function, due to a defect in workmanship or materials will, at our option, be replaced or repaired free of charge.
Warranty claims for items that have broken or are no longer useful due to normal wear, misuse, abuse, alteration, grinding, or heating, will not be honored. Proof of purchase including the purchase date is required for warranty consideration. Please contact Ken-Tool direct by phone or email if you have a warranty claim.
Warranty Registration should be done direct on the Manufacturers website .
Disclaimer: This summary is based on published warranty information but may not be comprehensive. For full details, it is best to review the specific warranty policy for your product and contact Ken-Tool directly.
