Ken-Tool 21102 20 Ton Air Jack – Short
Ken-Tool 21102 20 Ton Air Jack – Short
BRAND: Ken-Tool
SKU: 21102
In Stock
Couldn't load pickup availability
Ken-Tool 21102 20 Ton Air Jack – Short
Item Number: 21102
The Ken-Tool 21102 is the short configuration of the company’s 20 ton air jack. The lower collapsed height is the whole point: it fits under lift points that a taller jack simply cannot get beneath, on loaded trailers, low-ride equipment and vehicles sitting on flat tires.
Like every model in Ken-Tool’s 21100 through 21108 line, it runs off standard shop air instead of a hand pump, is fully welded rather than bolted together, and uses chrome-plated components that hold up to road salt and shop chemicals. It pairs directly with Ken-Tool’s 22 ton and 12 ton jack stands.
Where you need more reach instead of less height, the same jack is available in a tall configuration as item 21101.
Applications
- Low-clearance lift points on loaded trailers and lowboys
- Vehicles sitting on flat or deflated tires
- Truck, bus and equipment fleet maintenance
- Mobile and roadside service where access is limited
Features & Benefits
- 20 ton (40,000 lb) rated lifting capacity
- Short configuration for low-clearance and tight-access lift points
- Air/hydraulic operation off standard shop air, no hand pumping required
- Fully welded construction with chrome-plated components
- Matches Ken-Tool’s 22 ton and 12 ton jack stands for a complete system
- Also available in a tall configuration as item 21101
- Backed by a one-year Ken-Tool warranty
Safety & Compliance
Always support a raised vehicle on stands rated for the load before going underneath it. Never work under a vehicle held by a jack alone. Read all instructions before use.
Companion product: 20 Ton Air Jack – Tall (item 21101).
Prop 65 Warning
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Item No.: 21102
- Rated capacity: 20 ton (40,000 lb)
- Configuration: Short / low collapsed height
- Operation: Air / hydraulic
- Shipping dimensions: 15.5in. x 7.5in. x 8.5in.
- Warranty: One year
Shipping
This is a Plus Shipping item which only can be shipped to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.
Price will be calculated at check-out.
UPS Shipping rates are calculated based on actual and dimensional weights. To find your rate, add the item to your cart and then enter your zip code into the right hand side of the shopping cart. If your total UPS order is over 120 lbs, the system will not calculate charges.
Shipping Responsibility Disclaimer
Once a package is marked as "Delivered" by the carrier, we are no longer responsible for its whereabouts unless you specifically requested a signature requirement at checkout. If no signature is requested and the package goes missing after delivery, we cannot be held liable for the loss. Additionally, any delivery issues must be reported to us within 12 hours of the marked delivery time. Failure to notify us within this timeframe may result in a forfeiture of claims, as delayed reporting significantly reduces the chances of locating a misdelivered package. If you would like to add insurance to your shipment to protect against potential loss or theft, please inform us before your order ships. Insurance is not included by default.
*Note: If you are having trouble checking out, please call us at (321)-423-5290.
OR
If you have a special shipping request you need arranged, please email
or call us.
Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.
SHIPPING COST DISCLAIMER
Shipping can be very complicated, especially with LTL Freight items, and it can be challenging to always quote the exact shipping price with complete accuracy. We do not make money from shipping and only pass along the actual shipping cost charged by the carrier.
If the shipping cost we quoted or provided is less than the actual amount charged by the carrier, we reserve the right to not honor the sale at that shipping price and may cancel the order if necessary. However, before any order is canceled, you will be given the opportunity to pay any additional shipping charges if you choose to do so.
Warranty Information
Ken-Tool customers should be satisfied with the performance, quality and workmanship of whatever product they buy. All Ken-Tool products are warranted against defects in materials and workmanship for one year from the date of purchase. Any Ken-Tool branded product that fails to perform its intended function, due to a defect in workmanship or materials will, at our option, be replaced or repaired free of charge.
Warranty claims for items that have broken or are no longer useful due to normal wear, misuse, abuse, alteration, grinding, or heating, will not be honored. Proof of purchase including the purchase date is required for warranty consideration. Please contact Ken-Tool direct by phone or email if you have a warranty claim.
Warranty Registration should be done direct on the Manufacturers website .
Disclaimer: This summary is based on published warranty information but may not be comprehensive. For full details, it is best to review the specific warranty policy for your product and contact Ken-Tool directly.
