Ken-Tool 21106 20 Ton Bottle Jack – Short
Ken-Tool 21106 20 Ton Bottle Jack – Short
BRAND: Ken-Tool
SKU: 21106
In Stock
Couldn't load pickup availability
Ken-Tool 21106 20 Ton Bottle Jack – Short
Item Number: 21106
The Ken-Tool 21106 is the short-body version of the company’s 20 ton hydraulic bottle jack. Capacity is unchanged at 40,000 lb; what changes is the closed height, which is what determines whether the jack goes under the lift point at all. On a loaded trailer, a low-ride chassis or a vehicle sitting on a flat, that clearance is the entire decision.
It needs no air line and no power source, so it works as well in a roadside kit as it does on a shop floor. Construction follows the rest of Ken-Tool’s 21100 through 21108 line: fully welded, chrome-plated components, one-year warranty.
Where you need more lift height rather than less closed height, the standard-body version is item 21105.
Applications
- Low-clearance lift points on loaded trailers and lowboys
- Vehicles sitting on flat or deflated tires
- Roadside and mobile truck service
- Agricultural and construction equipment with limited underbody access
Features & Benefits
- 20 ton (40,000 lb) rated hydraulic lifting capacity
- Short body for low-clearance and tight-access lift points
- No air supply or power source required
- Fully welded construction with chrome-plated components
- Standard-height version available as item 21105
- Backed by a one-year Ken-Tool warranty
Safety & Compliance
Always support a raised vehicle on stands rated for the load before going underneath it. Never work under a vehicle held by a jack alone. Read all instructions before use.
Companion product: 20 Ton Bottle Jack (item 21105).
Prop 65 Warning
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Item No.: 21106
- Rated capacity: 20 ton (40,000 lb)
- Configuration: Short body / low closed height
- Operation: Manual hydraulic
- Shipping dimensions: 7in. x 7in. x 8in.
- Warranty: One year
Shipping
This is a Plus Shipping item which only can be shipped to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.
Price will be calculated at check-out.
UPS Shipping rates are calculated based on actual and dimensional weights. To find your rate, add the item to your cart and then enter your zip code into the right hand side of the shopping cart. If your total UPS order is over 120 lbs, the system will not calculate charges.
Shipping Responsibility Disclaimer
Once a package is marked as "Delivered" by the carrier, we are no longer responsible for its whereabouts unless you specifically requested a signature requirement at checkout. If no signature is requested and the package goes missing after delivery, we cannot be held liable for the loss. Additionally, any delivery issues must be reported to us within 12 hours of the marked delivery time. Failure to notify us within this timeframe may result in a forfeiture of claims, as delayed reporting significantly reduces the chances of locating a misdelivered package. If you would like to add insurance to your shipment to protect against potential loss or theft, please inform us before your order ships. Insurance is not included by default.
*Note: If you are having trouble checking out, please call us at (321)-423-5290.
OR
If you have a special shipping request you need arranged, please email
or call us.
Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.
SHIPPING COST DISCLAIMER
Shipping can be very complicated, especially with LTL Freight items, and it can be challenging to always quote the exact shipping price with complete accuracy. We do not make money from shipping and only pass along the actual shipping cost charged by the carrier.
If the shipping cost we quoted or provided is less than the actual amount charged by the carrier, we reserve the right to not honor the sale at that shipping price and may cancel the order if necessary. However, before any order is canceled, you will be given the opportunity to pay any additional shipping charges if you choose to do so.
Warranty Information
Ken-Tool customers should be satisfied with the performance, quality and workmanship of whatever product they buy. All Ken-Tool products are warranted against defects in materials and workmanship for one year from the date of purchase. Any Ken-Tool branded product that fails to perform its intended function, due to a defect in workmanship or materials will, at our option, be replaced or repaired free of charge.
Warranty claims for items that have broken or are no longer useful due to normal wear, misuse, abuse, alteration, grinding, or heating, will not be honored. Proof of purchase including the purchase date is required for warranty consideration. Please contact Ken-Tool direct by phone or email if you have a warranty claim.
Warranty Registration should be done direct on the Manufacturers website .
Disclaimer: This summary is based on published warranty information but may not be comprehensive. For full details, it is best to review the specific warranty policy for your product and contact Ken-Tool directly.
