PCL PDO600S 3/4 inch Stainless Steel Dropout Water Separator

Specifications

• Air Treatment Type: Filter
• Filtration Size: 1 micron
• Inlet Connection: 3/4 in. BSPT
• Outlet Connection: 1/2 in. BSPT
• Max Inlet Pressure: 217 psi
• Drain Type: Manual
• Flow Rate: 32 CFM
• Operating Temperature: 32–176°F
• Construction: Stainless Steel Grade 304
• Approvals: ISO 12500 parts 3 & 4, ATEX Mark: Ex II 2G IIC T6 Gb
• Dimensions: 9.3 × 2.75 in. dia
• EAN: 5014875130835
• Shipping Weight: 4.2 lbs

Documents

Brochure

Specifications

Shipping

This is a Plus Shipping item which only can be shipped to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.

Price will be calculated at check-out.

UPS Shipping rates are calculated based on actual and dimensional weights. To find your rate, add the item to your cart and then enter your zip code into the right hand side of the shopping cart. If your total UPS order is over 120 lbs, the system will not calculate charges.

Shipping Responsibility Disclaimer

Once a package is marked as "Delivered" by the carrier, we are no longer responsible for its whereabouts unless you specifically requested a signature requirement at checkout. If no signature is requested and the package goes missing after delivery, we cannot be held liable for the loss. Additionally, any delivery issues must be reported to us within 12 hours of the marked delivery time. Failure to notify us within this timeframe may result in a forfeiture of claims, as delayed reporting significantly reduces the chances of locating a misdelivered package. If you would like to add insurance to your shipment to protect against potential loss or theft, please inform us before your order ships. Insurance is not included by default.

*Note: If you are having trouble checking out, please call us at  (321)-423-5290.

OR

If you have a special shipping request you need arranged, please email
 or call us.

Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.

Warranty Information

PCL warrants that on delivery and for a period of 12 months from the date of delivery or until the Goods are sold on to a third party end user (whichever is sooner) (Warranty Period), the Goods shall:

6.1.1 conform in all material respects with their description;
6.1.2 be free from material defects in design, material and workmanship; and
6.1.3 be of satisfactory quality (within the meaning of the Sale of Goods Act 1979).

6.2 Subject to condition 6.3, if:
6.2.1 the Buyer gives notice in writing during the Warranty Period within a reasonable time of discovery that some or all of the Goods do not comply with the warranty set out in condition 6.1;
6.2.2 the Seller is given a reasonable opportunity of examining such Goods; and
6.2.3 the Buyer (if asked to do so by the Seller) returns such Goods to the Seller's place of business at the Buyer's cost, the Seller shall, at its option, repair or replace the defective Goods, or refund the price of the defective Goods in full.

6.3 The Seller shall not be liable for the Goods' failure to comply with the warranty in condition 6.1 if:
6.3.1 the Buyer makes any further use of such Goods after giving a notice in accordance with condition 6.2;
6.3.2 the defect arises because the Buyer failed to follow the Seller's oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice;
6.3.3 the defect arises as a result of the Seller following any drawing, design or specification for the Goods supplied by the Buyer;6.3.4 the Buyer alters or repairs such Goods without the written consent of the Seller;
6.3.5 the defect arises as a result of fair wear and tear, wilful damage, negligence, or abnormal working conditions;
6.3.6 the Goods differ from their description as a result of changes made to ensure they comply with applicable statutory or regulatory standards

6.4 Where Goods are returned to the Seller and such Goods are found not to be in breach of the warranty given in condition 6.1, the Seller shall have the right to charge the Buyer a handling fee in relation to the return of such Goods.

6.5 The Buyer shall not return the Goods to the Seller without notifying the Seller in writing in advance that the Goods are going to be returned.

6.6 Except as provided in this condition 6, the Seller shall have no liability to the Buyer in respect of the Goods' failure to comply with the warranty set out in condition 6.1.

6.7 The terms of these Conditions shall apply to any repaired or replacement Goods supplied by the Seller under condition 6.2.

Warranty Registration should be done direct on the Manufacturers website PCL .

Disclaimer: This summary is based on published warranty information but may not be comprehensive. For full details, it is best to review the specific warranty policy for your product and contact PCL directly.