ROLAIR 13GRBMHK30 13 HP Base-Mount Gas Truck Mount Air Compressor
ROLAIR 13GRBMHK30 13 HP Base-Mount Gas Truck Mount Air Compressor
BRAND: ROLAIR
SKU: 13GRBMHK30
Ships From Manufacturer
Couldn't load pickup availability
ROLAIR 13GRBMHK30 13 HP Base-Mount Gas Truck Mount Air Compressor
MODELS: 13GRBMHK30
The ROLAIR 13GRBMHK30 13 HP Base-Mount Gas Truck Mount Air Compressor is designed for service vehicles, agricultural applications and other locations where engine-driven compressed air is required. It delivers 23.0 @ 175 PSI.
Its two-stage splash-lubricated pump uses cast-iron cylinders, an aluminum head and crankcase for heat dissipation, ball bearings, bearing inserts, reed valves and an oil sight gauge. Standard equipment includes automatic unloading, a pressure gauge, an ASME-approved safety relief valve, V-belt drive, replaceable intake filter/silencer and an enclosed steel belt guard.
Important Notes:
- The 5.5-13 HP gas basemount configuration is built onto twin tanks without the standard width and height dimensions.
- When ordered with surge tanks, its price is the same as the corresponding 60-gallon model.
- Battery trays are supplied loose and are not installed on gas basemount configurations.
- Use only air-compressor oil of the correct type and viscosity. Do not use detergent motor oil. ROLAIR recommends genuine ROLAIR compressor oil.
- The air compressor pictured is a stock photo from the manufacturer's website and is not the actual air compressor listed. It is a close representation of the model.
Prop 65 Warning
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Horsepower: 13 HP
- Compressor Stage: Two-Stage
- Power Type: Gas engine
- CFM Delivered: 23.0 @ 175 PSI
- Pump Speed: 1150 RPM
- Lubrication: Splash lubricated
13GRBMHK30 - Base Mount
- Tank Configuration: Base Mount
- Dimensions: 38" L x 20" W x 32" H
- Approximate Shipping Weight: 295 lb.
ROLAIR K30 Pump
Hover to enlarge or select the image to view it full size.
Pump Specifications
- Pump Model: K30
- Maximum Pressure: 200 PSI
- Number of Cylinders: 2
- Low-Pressure Bore: 4.13 in.
- High-Pressure Bore: 2.05 in.
- Stroke: 3.31 in.
- Flywheel Diameter: 15.16 in.
- V-Belts: 2-A
- Intake: 0.75 in.
- Discharge: 0.75 in.
- Oil Capacity: 47 oz.
Standard Equipment
- 15.16-inch aluminum flywheel
- Crankcase breather
- Oil sight glass
- Filter
Shipping
This Item Qualifies for FREE LTL SHIPPING (via Truck) it applies only to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.
LTL Freight Shipping Options
- LIMITED ACCESS - commercial / non-commercial / Farms.(+ $85.00).
- I have a forklift for unloading Freight at My Business location
- Deliver to local freight terminal for pickup.
- Lift Gate Is Required.(+$150.00)
- Residential Delivery.(+ $85.00)
Please select one of the choices above BEFORE adding to the cart!
PLEASE NOTE:
This item ships by truck. If you Require to ship to a Non-Commercial Address, please email or call (321)-423-5290 so we can give you an updated shipping Quote.
Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.
Warranty Information
ROLAIR Manufacturer Warranty
Warranty repairs must be completed by an authorized ROLAIR service center.
Associate Engineering Corporation warrants ROLAIR air compressors against defects in materials and workmanship for 12 months from the original retail purchase date or 18 months from the date of manufacture, whichever occurs first.
If a covered defect is reported within the applicable warranty period, the purchaser must ship the compressor to ROLAIR’s facility with transportation prepaid. ROLAIR will correct the defect through an appropriate repair or, at its discretion, provide a replacement part from its facility.
Associate Engineering Corporation is not responsible for unauthorized repairs, replacement work, compressor adjustments or labor performed by the purchaser.
This manufacturer warranty replaces other expressed, implied or statutory warranties, including warranties of merchantability or fitness for a particular purpose. No other person or company is authorized to assume additional obligations or liabilities on behalf of Associate Engineering Corporation.
Associate Engineering Corporation is not responsible for consequential, incidental or special damages, or for the improper selection of a compressor for a particular application.
Warranty Documents
